When you looking for parallel charging board xt60 fuse, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable parallel charging board xt60 fuse is not an easy task. In this post, we show you how to find the right parallel charging board xt60 fuse along with our top-rated reviews. Please check out our suggestions to find the best parallel charging board xt60 fuse for you.
Best parallel charging board xt60 fuse
1. nidici XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6AC 720i Lithium Batteries Charger Part
Feature
This lipo balance board lets you charge and balance up to six lipo batteries at the same time.The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one.
Features XT-60 for your batteries main leads and JST-XH balance plugs ranging from 2S to 6S,It can prevent each cell overcharge, so it can improve the balance efficiency. And the later period of the balance charging cycle is shorted substantially.
This lipo balance board is used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel.
The lipo balance board can protect each cell when overcharge or short circuit happens.
Description
2-6s XT60 Parallel charging board, with 2 XT60 Female to Deans T Plug Male ConnectorSpecification:
Connector: 6 XT60; 1 T-Plug
Max current: 30A
Cell: 2~6S
Battery: 6 packs (same discharge state andamp; cell count)
Voltage: 0~22.2VDC
USE STEPS
1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board.
2. Connect the power port of Parallel charging board to the output port of balance charger
3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs.
Package Includes:
1 x 2-6s Parallel charging board (6 XT60 and 1 T-Plug)
1 x Connect Cable
1 x User Manual
2. Hobby-Ace XT60 LiPo Battery Balance Charging Board Plate 2-6S Parallel Connect Plate
Feature
The XT60 Balanced Charging Board used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallelSupport 6 pairs 2S,6 pairs 3S,6 pairs 4S,6 pairs 5S,6 pairs 6S balance charge
Built-in short circuit protection, Convenient to charge and balance up to 6 lipo batteries at the same time when used with a balance charger
Prevent Short Circuit : 20Z of thick copper foil sustainable resistance to flow 80A
It can prevent each cell overcharge, so it can improve the balance efficiency. And the later period of the balance charging cycle is shorted substantially.
Description
Specification:Balanced output lines using 20AWG stranded silicone line
main output line using 12AWG stranded silicone line
Cell: 26S
Voltage: 022.2VDC
Max current: 30A
Battery: 6 packs same capacity cell count
Connector: XT60 Connector
Features:
Used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel
Convenient to charge and balance up to six lithium batteries at the same time when used with a balance charger
The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one
Built-in short circuit protection
20Z of thick copper foil sustainable resistance to flow 80A
How to use 1. Connect the two ends of the 6S cable to the balanced terminals of the balanced charger and the balanced charging board.
2. Connect the power supply terminal of the balanced charging board to the output terminal of the balanced charger.
3. Connect the battery to the battery panel. Insert the balance head first, and then connect it to the battery output terminal.
Package Including
1 * 2-6S Parallel Charging Board
1 * Connect Cable
1 * Manual
3. Rcharlance XT60 Parallel Charging Board for 3S 4S LiPo Batteries charging board XT60 & Banana Connecting Cable
Feature
Supports up to four packs of the same type, same cells 3-4S battery packBalanced port output line with 14AWG multi-strand silicone line
Equipped with safety protection XT60 plug silicone cap
Thicken PCB copper foil, allow security using 20A charging currentHigh-quality gold-plated connectors
Original Suppliers with much lower price and high Quality assurance, we are reliable and responsible sellers,just buy without any worries!
Description
Product description
XT60 Parallel Charging Board for 3S 4S LiPo Batteries XT60Connector with XT60 to Banana Connecting Cable
Specifications:
Item:3-4S Parallel Charging Board
Balance Output Cable: 14AWG silicon cable
Current: Support MAX. 20A charge current
Support 4 packs 3S or 4 packs 4S
Features:
1. Supports up to four packs of the same type, same cells 3-4S battery pack.
2. Balanced port output line with 14AWG multi-strand silicone line.
3. Equipped with safety protection XT60plug silicone cap.
4. High-quality gold-plated connectors.
5.Thicken PCB copper foil, allow security using 20A charging current
6. Equipped with 30A fu-se between any two groups of batteries, to prevent lineburned due tothe largebattery pressure.
7.Contains the battery voltage display function
8.Weight: 85g
Package Including
1 * XT60 Parallel Charging Board for 3s 4s LiPo Batteries
1 * XT60 to banana Connector
2 * Number Sticker
4. XT60 Parallel Charging Board 2S-6S RC Lipo Battery Charger Plate With 4mm Bullet Banana Connector Plug for Imax B6 B6AC Charger Adapter
Feature
Parallel packing board for lipo balance charger, such as imax b6 b8 b6ac, una6, and other balance chargersSave your time: which lets you charge and balance up to six lipo batteries at the same time
Support max six 2-6s batteries sets: features 4mm bullet banana plug for your batteries' main leads and jst-xh balance plugs ranging from 2s to 6s
Prevent short circuit: built-in short circuit protection, prevent each cell when overcharge or short circuit happens
Super strong expansion ability: it can support combined use for three parallel ok boards (it means you can charge eighteen batteries which have the same characters at the same time)
Description
DescriptionThis product is used to connect and charge 1 to 6 batteries in parallel (including the LiPo, LiFe and Lion).
Feature:
1. It can protect the charging batteries when short circuit happens.
2.It can support combined use for three parallel charging boards (It means you can charge eighteen batteries which have the same characters at the same time).
3. It has 20Z-thick copper foil, so it can withstand continual current of 80A.
4. It can prevent each cell overcharge, so it can improve the balance efficiency. And the later period of the balance charging cycle is shorted substantially.
5. It consumes only 1/6 of the time when charging six batteries separately consumes, so it can save the total charging time.
6. It avoids the trouble of replacing batteries repeatedly.
Use steps:
1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board.
2. Connect the power port of Parallel Charging Board to the output port of balance charger.
3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs. Set the charging voltage (Charging a single battery is the same)
Package Includes:
- 1 x XT60 Parallel Charge Board with 4mm Banana Connector
5. AKK XT60 Lipo LiFe Li-ion Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate for Imax B6 B6AC (Banana Plug Input)
Feature
Used for Parallel charging 1-6 batteries (including LiPo, LiFe and Lion)Save time:1.avoid replacing the battery repeatedly; 2.charge time: 6 batteries=1 battery
40A Fuse, Short circuit protection
Copper foil thickness: 20Z, sustainable resistance to flow 80A
Improve the balance charge efficiency, prevent single battery to overcharge, the charging cycle is greatly reduced with the use of time
Description
AKK 2-6s XT60 Parallel charging board
Specification:
Output Connector: 6* XT60 (1 T-Plug used to connect other same charging boards)
Input connector: Banana Plug
Max current: 30A
Fuse: 40A
Copper foil thickness: 20Z, sustainable resistance to flow 80A
Cell: 2~6S
Battery: 6 packs (same discharge state andamp; cell count)
Voltage: 0~22.2V DC
USE STEPS
1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board.
2. Connect the power port of Parallel charging board to the output port of balance charger
3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs.
Package Includes:
1 x AKK 2-6s Parallel charging board
1 xConnect Cable
1 x User Manual
6. Paraboard Parallel Battery Charging Board Plate for LiPo with T Dean Plug Connector for imax B6 B6AC UN-A6 charger Adapter Expansion Board
Feature
Charge and balance up to six battery packs simultaneously without a clutter of wiresFeatures T Dean plugs for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S.
Pls do not spend all day charging your batteries one at a time!
Plugs right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing
A great choice for rc helicopters or scale airplanes
Description
2S-6S Lipo Parallel Charging Board Balance / Charging Plate T-plug
Features:
1.balanced output lines using 20AWG stranded silicone line.
2.main output lines using high quality silicone 14AWG stranded wire.
3.T plug of silica gel with a safety cap.
4.high-quality output plugs.
5.Thick copper PCB to allow safe passage of 30 amps charging current.
Specification:
Cell: 2~6S
Battery: 6 packs same capacity & cell count
Connector: T Connector
Net weight:138g
Package weight:158g
Package includes:1 x Parallel charging plate
1 x Balanced cable(7-pin balance ports)
7. XT60 Parallel Charging Board/Charge Plate for 3S 4S Lipo Battery with Voltage LED Display/Banana Plug Input
Feature
Supports up to 4 same battery packs charging simultaneously (3S or 4S lipo)LED Display to show total voltage and the voltage of each battery cyclically
High-quality AMASS XT60 connectors; replaceable 30A fuse between any two ports; thicken PCB copper foil provide a 20A safe charging current
Compatible with most balance charger that with banana port
Factory outlets, please feel free to contact us with any questions
Description
Specifications:
Compatible battery types: 3S/4S Lipo
Input connector: banana plug
Output connector: XT60
Maximum charging current: 20A
Fuse: 30A fuse3 (replaceable)
No-load current: 17mA-22mA
Board size: 8*5cm
Weight: 65g/0.14 lb
Cable length: banana plug cable: 17cm
5 pin cable: 15cm
Voltagedisplay instructions:
It will display a total voltage firstly;then display average voltage of single cell in a 3 seconds cycle ("OC1"=the 1st cell; "OC2"= the 2nd cell...)
Note:
1. Only supports charging the same type of battery at the same time(3S/4S Lipo)
2. Please keep it in a safe place to prevent short circuits
Package Includes:
1x XT60 charging board for 3S/4S Lipo battery
8. Padarsey XT60 Parallel Charging Board 2S-6S Lipo Battery Charger Plate with 4mm Bullet Banana Connector Plug for Imax B6 B6AC Charger
Feature
1) XT60 Parallel board for lipo balance charger, such as imax b6 b8 b6ac, una6, and other balance chargers2) Save your time: which lets you charge and balance up to six lipo batteries at the same time
3) Support max six 2-6s batteries sets: features 4mm bullet banana plug for your batteries' main leads and jst-xh balance plugs ranging from 2s to 6s
4) Prevent short circuit: built-in short circuit protection, prevent each cell when overcharge or short circuit happens
5) Super strong expansion ability: it can support combined use for three parallel ok boards (it means you can charge eighteen batteries which have the same characters at the same time)
Description
DescriptionThis product is used to connect and charge 1 to 6 batteries in parallel (including the LiPo, LiFe and Lion).
Feature:
1. It can protect the charging batteries when short circuit happens.
2.It can support combined use for three parallel charging boards (It means you can charge eighteen batteries which have the same characters at the same time).
3. It has 20Z-thick copper foil, so it can withstand continual current of 80A.
4. It can prevent each cell overcharge, so it can improve the balance efficiency. And the later period of the balance charging cycle is shorted substantially.
5. It consumes only 1/6 of the time when charging six batteries separately consumes, so it can save the total charging time
6. It avoids the trouble of replacing batteries repeatedly.
Use steps:
1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board.
2. Connect the power port of Parallel Charging Board to the output port of balance charger.
3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs. Set the charging voltage (Charging a single battery is the same)
Package Includes:
- 1 x XT60 Balance Charge Board with 4mm Banana Connector
9. Wolfwhoop XT60 Plug 3-4S LiPo Battery Parallel Balance Charging Board Voltage LED Display/Banana Plug Input
Feature
Using LED lights display working stateUse safety fuse (30A) to protect circuit
Accelerates battery charging, the same time 4 batteries charge
XT-60 for your batteries main leads and JST-XH balance plugs ranging from 3S or 4S, It can prevent each cell overcharge, so it can improve the balance efficiency
Parallel charging allows you to charge multiple LiPo batteries at once using a single charger. Parallel charging is a more effective and faster way of charging your batteries
Description
Specifications:
Maximum charging current: 20A
Input connector: Banana plug
Output connector: XT60
Compatible battery types: 3S/4S Lipo battery
Fuse: 30A fuse3 (replaceable)
No-load current: 17mA-22mA
Board size: 8*5cm
Weight: 65g/0.14 lb
Cable length: banana plug cable: 17cm
5 pin cable: 15cm
Voltage display instructions:
First of all, The LED shows a total voltage; then batteries voltage is displayed every 3 seconds cycle, such as: "OC1" = the first battery; "OC2" = the second battery ...
Note:
1. Only supports charging the same type of battery at the same time(3S/4S Lipo)
2. Please keep it in a safe place to prevent short circuits
Package Included:
1x XT60-C charging board for 3S/4S Lipo battery
10. XT60 Lipo Battery Charger 2-6S Parallel Balanced Charging Board Charging Plate Expansion Board for Imax B6 B6AC
Feature
Balance chargerThis lipo balance board lets you charge and balance up to six lipo batteries at the same time.It quite save your time which means you can spend more time actually using them.Save timeThe charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one.
TypeFeatures XT-60 for your batteries main leads and JST-XH balance plugs ranging from 2S to 6S,It can prevent each cell overcharge, so it can improve the balance efficiency. And the later period of the balance charging cycle is shorted substantially.
SuitableThis lipo parallel charger is used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel.
SafetyThe balance charging board can protect each cell when overcharge or short circuit happens.
Description
This lipo balance board is used to connect and charge 1 to 6 batteries in parallel (including the LiPo, LiFe and Lion). Feature:
It can protect the charging batteries when short circuit happens.
It can support combined use for three parallel charging boards (It means you can charge eighteen batteries which have the same characters at the same time).
It has 20Z-thick copper foil, so it can withstand continual current of 80A.
It can prevent each cell overcharge, so it can improve the balance efficiecy. And the later period of the balance charging cycle is shorted substantially.
It consumes only 1/6 of the time when charging six batteries separately consumes, so it can save the total charging time.
It avoids the trouble of replacing batteries repeatedly.
Use steps:
1. Connect the both sides of a balance cable respectively to the balance port of the balance charger and parallel charging board.
2. Connect the power port of Parallel Charging Board to the output port of balance charger.
3. Connect batteries to the board. Plug the balance heads firstly, and then connect them to the batteries' outputs. Set the charging voltage (Charging a single battery is the same)
Specification:
- Cell: 2~6S
- Voltage: DC 0~22.2V
- Max current: 40A
- Connector: XT60
- Battery: 6 packs same capacity & cell count
Package includes:
1 x Lipo parallel charging plate
1 x manual