We spent many hours on research to finding traxxas stampede 4x4 vxl body, reading product features, product specifications for this guide. For those of you who wish to the best traxxas stampede 4x4 vxl body, you should not miss this article. traxxas stampede 4x4 vxl body coming in a variety of types but also different price range. The following is the top 10 traxxas stampede 4x4 vxl body by our suggestions:

We spent many hours on research to finding traxxas stampede 4×4 vxl body, reading product features, product specifications for this guide. For those of you who wish to the best traxxas stampede 4×4 vxl body, you should not miss this article. traxxas stampede 4×4 vxl body coming in a variety of types but also different price range. The following is the top 10 traxxas stampede 4×4 vxl body by our suggestions:

Best traxxas stampede 4x4 vxl body

Product Features Editor's score Go to site
Traxxas 3350R Velineon VXL-3s Brushless Power System Traxxas 3350R Velineon VXL-3s Brushless Power System
Go to amazon.com
Traxxas 36076-4 Stampede VXL 2WD Brushless Monster Truck, Green Traxxas 36076-4 Stampede VXL 2WD Brushless Monster Truck, Green
Go to amazon.com
Traxxas 67086-4 Stampede 4X4 1/10 Monster Truck with TQi 2.4GHz Radio/TSM, Silver Traxxas 67086-4 Stampede 4X4 1/10 Monster Truck with TQi 2.4GHz Radio/TSM, Silver
Go to amazon.com
Traxxas 6711X Stampede 4x4 Prographix Body with Decal Sheet Traxxas 6711X Stampede 4x4 Prographix Body with Decal Sheet
Go to amazon.com
Traxxas Stampede 4X4 VXL Body Traxxas Stampede 4X4 VXL Body
Go to amazon.com
Rustler 4X4 VXL: 1/10 Scale Stadium Truck with TQi Traxxas Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM) Rustler 4X4 VXL: 1/10 Scale Stadium Truck with TQi Traxxas Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)
Go to amazon.com
ProLine 341200 1966 Ford F-100 Clear Body Vehicle Part ProLine 341200 1966 Ford F-100 Clear Body Vehicle Part
Go to amazon.com
SummitLink Compatible Custom Body Flag Strip Style Replacement for 1/10 Scale RC Car or Truck (Truck not Included) ST-ST-01 SummitLink Compatible Custom Body Flag Strip Style Replacement for 1/10 Scale RC Car or Truck (Truck not Included) ST-ST-01
Go to amazon.com
Compatible Custom Body Graffiti Pink Pig Style Replacement for 1/10 Scale RC Car or Truck (Truck not Included) STB-PIG-01 Compatible Custom Body Graffiti Pink Pig Style Replacement for 1/10 Scale RC Car or Truck (Truck not Included) STB-PIG-01
Go to amazon.com
J Concepts 0225 Illusion Stampede 4x4 - Ford Raptor SVT Super Screw Body J Concepts 0225 Illusion Stampede 4x4 - Ford Raptor SVT Super Screw Body
Go to amazon.com
Related posts:

1. Traxxas 3350R Velineon VXL-3s Brushless Power System

Feature

Kit contains VXL-3s waterproof ESC, Velineon 3500 4-pole motor, and speed control mounting plate
ESC features 3 drive profiles: Sport, Race, and Training Mode to limit throttle to 50% for inexperienced drivers
Integrated two-stage low-voltage detection for Lithium Polymer (LiPo) battery usage.Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC); LiPo 2-3 Cells (7.4 to 11.1 Volts DC)
Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power
Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)

Description

The Traxxas 3350R is the perfect upgrade for your brushed Traxxas vehicle. The system installs easily in our Bandit, Stampede, Rustler, and Slash models. Use your stock battery or go with a more powerful 11.1V 3s LiPo battery to unlock the 60+mph potential of your vehicle with this brushless system powerhouse! The Velineon VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy operation that gives you all the control you need for maximum fun. Quickly choose from 3 drive profiles in exactly the same manner as other Traxxas electronic speed controls (such as the XL-5). Profiles include: Sport, Race, and Training Mode (patented). Training Mode limits full-throttle power to 50% allowing young or new drivers to safely develop their control skills before unleashing the full-throttle capability of the Velineon system. High-frequency transistors and advanced circuit design deliver incredibly smooth and refined throttle control. High-current capacity (320 amps peak) and two-stage thermal protection frees you from motor limits. The companion Velineon 3500 Brushless Motor is precision-matched for use in the 1/10th scale vehicles, delivering the perfect balance of brutal horsepower and efficiency. The sensorless design works with the sophisticated circuitry in the VXL-3s Electronic Speed Control for smooth starts and precise control, without the need for additional sensors and wiring. Since there are no brushes or commutator to cause friction and wear, Velineon brushless power is always fast, run after run.

2. Traxxas 36076-4 Stampede VXL 2WD Brushless Monster Truck, Green

Feature

Extreme Brushless VXL power for 65+ mph speeds and advanced TSM stability management to harness the power without sacrificing fun
Advanced TQi 2.4GHz transmitter and receiver with 36076-4 memory for fine tuning your speed machines
Waterproof electronics, digital high-torque 2075 servo, precision steel turnbuckles with heavy-duty rod ends, and tough metric Hex hardware
Tough Magnum 272 transmission with steel gears and Torque control slipper clutch
Batteries and charger sold separately

Description

The 2WD Stampede VXL has always been the first name in monster truck fun, but Traxxas stability management and brushless power put it over-the-top. With a top speed of over 65mph (with optional 3S lipo battery), Stampede VXL lets you explore the outer limits of what's possible. New Traxxas stability management allows arrow-straight acceleration on slippery surfaces without loss of control. TSM also makes high speed cornering corrections in the background for you, without unexpected side effects. The Velineon VXL-3s ESC works with the 3500 motor for extreme power, smooth starts, and precise control while its brushless design reduces wear and friction. The VXL-3s offers 3 driving modes: sport, race, and training mode. Training mode limits power to 50% to allow new drivers to gain experience. Velineon accepts standard 7-cell NiMH batteries up to 3S 11.1V LiPos with its integrated low-voltage protection. Waterproof electronics allow Stampede VXL the freedom to drive through water, mud and snow. The TQi 2.4GHz transmitter is fully adjustable and can be equipped with a Bluetooth module that turns your Android, iPad iPhone or iPod touch (sold separately) into a powerful tuning tool. Automatic 36076-4 recognition instantly recalls your settings for up to 30 Traxxas Link-enabled models. Stampede VXL is equipped to handle serious horsepower with its Torque-Control slipper clutch, heavy-duty turnbuckles and tough steel-geared transmission. Huge monster truck tires and digital high-torque steering Servo tackle almost any obstacle. The Stampede VXL is 100% assembled right out of the box. Battery and charger sold separately.

3. Traxxas 67086-4 Stampede 4X4 1/10 Monster Truck with TQi 2.4GHz Radio/TSM, Silver

Feature

Extreme Brushless VXL power for 60+ mph speeds and advanced TSM stability management to harness the power without sacrificing fun
Waterproof electronics for all-weather driving excitement in water, mud and snow!
Sealed differentials, heavy-duty driveshaft's, unique shock guards, and 4-position wheelie bar
Traxxas Link wireless compatible TQi 2.4GHz radio system and 5-channel receiver
Battery and charger sold separately. Speed Control Type-VXL-3s Electronic Speed Control. Overall Drive Ratio-13.97 (stock, out-of-box)

Description

The Stampede 4X4 VXL turns extreme power into unbelievable monster truck fun! Traxxas stability management allows arrow-straight acceleration on slippery surfaces without loss of control. Tsm also makes high speed cornering corrections in the background for you, without unexpected side effects. The Velineon brushless system enables Stampede 4X4 to shatter the speedometer with 60+mph speed! Stampede 4X4 is built Traxxas tough with a shaft-driven 4WD system and modular design of the Slash 4X4. A single center driveshaft connects the front and rear drive assemblies for maximum power transfer. The modular design allows the entire front or rear section to be removed with just a few screws. Stampede's ground clearance increases off-road versatility, allowing you to tackle rough terrain and obstacles. Waterproof electronics allow Stampede to conquer wet and muddy trails with no regard for the weather. The Velineon VXL-3s ESC works with the 3500 motor for extreme power, smooth starts, and precise control while its brushless design reduces wear and friction. The VXL-3s offers 3 driving modes: sport, race, and training mode. Training mode limits power to 50% to allow new drivers to gain experience. Velineon accepts standard 7-cell NiMH batteries up to 3S 11.1V LiPos with its integrated low-voltage protection. The TQi 2.4GHz transmitter is fully adjustable and can be equipped with a Bluetooth module that turns your Android, iPad iPhone or iPod touch (sold separately) into a powerful tuning tool. Automatic 67086-4 SLVR recognition instantly recalls your settings for up to 30 Traxxas Link-enabled models.

4. Traxxas 6711X Stampede 4x4 Prographix Body with Decal Sheet

Feature

Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
This product is made from high quality materials and designed for long-lasting performance.
This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
This product is made from high quality materials and designed for lasting performance
This is for use on RC vehicles, consult your user's manual for exact parts listings

Description

Replacement body for Stampede 4X4 comes with pre-painted ProGraphix. (Graphics are printed, requires paint & final color application) Also comes with decal sheet. Traxxas' unique ProGraphix painting process creates crisp, clean lines, smooth fades and amazing professional graphics. Very little painting is required. Just add a splash of color and you can start racing faster while looking better than ever!

5. Traxxas Stampede 4X4 VXL Body

Feature

Parts were remove from a brand new Traxxas Stampede 4X4

Description

This is a replacement Body for the Traxxas Stampede 4X4 VXL

6. Rustler 4X4 VXL: 1/10 Scale Stadium Truck with TQi Traxxas Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

Feature

Red
1/10 Scale
Traxxas Stability Management
TQi 2.4 GHz Radio System

Description

Rustler VXL 4x4 Brushless Stadium Truck
  • Red
  • 1/10 Scale
  • Traxxas Stability Management
  • TQi 2.4 GHz Radio System

    7. ProLine 341200 1966 Ford F-100 Clear Body Vehicle Part

    Feature

    Licensed 1966 Ford f-100 body forstampedetrucks
    Old-school "hay Hauler" looks
    Unmatched detail and realism

    Description

    This is a 1966 Ford F-100 clear Stampede body. Now you can have your very own custom "hay Hauler" with pro-line's licensed 1966 Ford F-100 body! the '66 F-100 body comes with perfectly scaled details like the step-sides and huge fender flares that will bring you back to the good old days.

    8. SummitLink Compatible Custom Body Flag Strip Style Replacement for 1/10 Scale RC Car or Truck (Truck not Included) ST-ST-01

    Feature

    Can be used on Stampede 1/10 Scale. It also fits on 1/10 Bigfoot. Bodies ONLY, truck not included.
    They are the custom bodies with painting and decals for Stampede / Bigfoot / Rustler All versions
    Body already painted, holes already drilled, it is ready to be mounted to your model
    They also fit on Rustler, when mounting on Rustler, a rear hole at the center needs to be drilled.
    You get the same bodies as shown in the picture.

    Description

    This auction is for ONE Stampede Body with stickers ONLY, truck not included.

    This is the replacement body with painting and decals for the Stampede. It will fit all Stampede versions. It is the same specs as the stock body. Body already painted, holes already drilled. It is ready to be mounted to your Stampede. You get exactly the same body as shown in the picture. It can also fit the Bigfoot.

    This is for 1/10 scale.

    FEATURES:
    Highly detailed body and cutting lines

    INCLUDES:
    Painted body for the Stampede as shown in picture

    9. Compatible Custom Body Graffiti Pink Pig Style Replacement for 1/10 Scale RC Car or Truck (Truck not Included) STB-PIG-01

    Feature

    Can be used on Stampede 1/10 Scale. It also fits on 1/10 Bigfoot. Bodies ONLY, truck not included.
    They are the custom bodies with painting and decals for Stampede / Bigfoot / Rustler All versions
    Body already painted, holes already drilled, it is ready to be mounted to your model
    They also fit on Rustler, when mounting on Rustler, a rear hole at the center needs to be drilled.
    You get the same bodies as shown in the picture.

    Description

    This auction is for ONE Stampede Body with stickers ONLY, truck not included.

    This is the replacement body with painting and decals for the Stampede. It will fit all Stampede versions. It is the same specs as the stock body. Body already painted, holes already drilled. It is ready to be mounted to your Stampede. You get exactly the same body as shown in the picture. It can also fit the Bigfoot.

    This is for 1/10 scale.

    FEATURES:
    Highly detailed body and cutting lines

    INCLUDES:
    Painted body for the Stampede as shown in picture

    10. J Concepts 0225 Illusion Stampede 4x4 - Ford Raptor SVT Super Screw Body

    Feature

    Officially licensed by Ford to JConcepts
    Scale inspired body, cab and window design
    1:1 headlight and grill treatment with pronounced front bumper
    Window masks and detailed Ford Raptor SVT decal sheet

    Description

    Key Features

    • Officially licensed by Ford to JConcepts
    • Scale inspired body, cab and window design
    • 1:1 headlight and grill treatment with pronounced front bumpe
    • Front and rear fender flares for maximum realism
    • Super Crew cab with recessed windows
    • Clear heavy-duty polycarbonate with protective film
    • Window masks and detailed Ford Raptor SVT decal sheet

    Overview

    Get ready, JConcepts has reached new ground with the Ford Raptor SVT Super Crew Stampede 4x4 body. Officially licensed by Ford, the JConcepts Ford Raptor SVT body, specifically for the Traxxas electric Stampede 4x4, is inspired from the ground up as a scale platform to turn the Stampede into an off-road looking street-wise machine. The Raptor SVT - F-150 body by JConcepts begins with the latest in 1:1 truck detail by incorporating the latest treatment in grill and headlight design with pronounced bumper, adding street appeal. Front and rear fender flares provide the clearance necessary to run an assortment of tires and wheels while maintaining that exclusive design. Super Crew cab design with recessed side windows, louvers along the front hood and sun-roof outline highlight a number of the front-end styling cues. Deep recessed bed area with incredible detail finish off this extraordinary, tough design.

    Conclusion

    All above are our suggestions for traxxas stampede 4x4 vxl body. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using traxxas stampede 4x4 vxl body with us by comment in this post. Thank you!